Sale!
mylink chevrolet camaro
mylink chevrolet camaro
2012 camaro touch screen
mylink chevrolet camaro
mylink chevrolet camaro
2012 camaro touch screen

2010 – 2012 Chevy Camaro MyLink Screen Upgrade with Optional Factory Navigation System

$1,399.00

All of our systems come complete with everything you’ll need for your installation; including all harnessing, GPS antenna, a complete set of instructions, installation videos (if available), navigation system programming to your specific vehicle (no dealer programming needed), and up to 15 minutes of technical support!

2010-2012 Camaro Factory MyLink and Navigation Upgrade

 

Compatibility and Programming

Please Supply Last 8 of Vin#

Year / Make / Model

Select Radio Type * 

Please select if you would like to add built in factory navigation to your MyLink screen

Backup Camera * 

Please select if you would like to add a backup camera

Please Verify Shipping * 

SKU: camaronav Category:

Have you been looking long and hard for the new factory GM MyLink system with navigation to your 2010 – 2012 Chevy Camaro?  Then look no further, here we will turn your 2010 – 2012 Chevy Camaro into Navigation System equipped. MVI has successfully retrofitted the new Factory Mylink Chevrolet Camaro navigation system to fit the 2010 – 2012 Chevy Camaro model years.  You would essentially be getting 2013 – 2015 technology in your vehicle, which would not only add factory navigation to your vehicle, but also add all of the MyLink features to your system ( phonebook downloading, voice recognition, Bluetooth streaming audio, Stitcher / Pandora, turn by turn instruction muting drivers side speaker, and more ).  

You will retain ALL of your factory features, with the exception of the lock / unlock feature located on your existing console, unless you are a 2012 – 2015 model year.  If adding the navigation part of the install isn’t as important and you would like to save a few bucks by just adding the MyLink features to your new touchscreen, just simply select from the drop down menu above.  Just note that navigation will not be included if you select the MyLink Only option.

2010 – 2012 CHEVY CAMARO NAVIGATION SYSTEM FEATURES INCLUDE

  • Actual GM OEM Mylink Chevrolet Camaro Navigation System, not an interface or overlay
  • Upgrades your vehicle with the new 7″ factory screen
  • Upgrades your vehicle with all of the new MyLink features in addition to adding a navigation system
  • Full touchscreen controls
  • Full Navigation Voice Recognition Features (when applicable)
  • Turn by turn guidance over left front speaker while system fades the music
  • Successful integration into the HUD (when applicable)
  • Actual OEM system can be serviced at any GM dealer across the US and Canada
  • All parts supplied for complete and total factory integration
  • E.M Mapping with full coverage for: USA, Puerto Rico, Virgin Islands, Mexico, and Canada. Check for Map updates on this link: The GM Navigation Store
  • Plus more!

INSTALLATION DIFFICULTY

REQUIREMENTS

  • Professional installation recommended
  • VIN # Number required for programming

Fitment:

• 2010 – 2012 Chevy Camaro

Weight9 lbs
Dimensions12 × 12 × 12 in

Additional Videos

Have you been looking long and hard for the new factory GM MyLink system with navigation to your 2010 – 2012 Chevy Camaro?  Then look no further, here we will turn your 2010 – 2012 Chevy Camaro into Navigation System equipped. MVI has successfully retrofitted the new Factory Mylink Chevrolet Camaro navigation system to fit the 2010 – 2012 Chevy Camaro model years.  You would essentially be getting 2013 – 2015 technology in your vehicle, which would not only add factory navigation to your vehicle, but also add all of the MyLink features to your system ( phonebook downloading, voice recognition, Bluetooth streaming audio, Stitcher / Pandora, turn by turn instruction muting drivers side speaker, and more ).  

You will retain ALL of your factory features, with the exception of the lock / unlock feature located on your existing console, unless you are a 2012 – 2015 model year.  If adding the navigation part of the install isn’t as important and you would like to save a few bucks by just adding the MyLink features to your new touchscreen, just simply select from the drop down menu above.  Just note that navigation will not be included if you select the MyLink Only option.

2010 – 2012 CHEVY CAMARO NAVIGATION SYSTEM FEATURES INCLUDE

  • Actual GM OEM Mylink Chevrolet Camaro Navigation System, not an interface or overlay
  • Upgrades your vehicle with the new 7″ factory screen
  • Upgrades your vehicle with all of the new MyLink features in addition to adding a navigation system
  • Full touchscreen controls
  • Full Navigation Voice Recognition Features (when applicable)
  • Turn by turn guidance over left front speaker while system fades the music
  • Successful integration into the HUD (when applicable)
  • Actual OEM system can be serviced at any GM dealer across the US and Canada
  • All parts supplied for complete and total factory integration
  • E.M Mapping with full coverage for: USA, Puerto Rico, Virgin Islands, Mexico, and Canada. Check for Map updates on this link: The GM Navigation Store
  • Plus more!

INSTALLATION DIFFICULTY

REQUIREMENTS

  • Professional installation recommended
  • VIN # Number required for programming

Fitment:

• 2010 – 2012 Chevy Camaro

Frequently Asked Questions

Have you been looking long and hard for the new factory GM MyLink system with navigation to your 2010 – 2012 Chevy Camaro?  Then look no further, here we will turn your 2010 – 2012 Chevy Camaro into Navigation System equipped. MVI has successfully retrofitted the new Factory Mylink Chevrolet Camaro navigation system to fit the 2010 – 2012 Chevy Camaro model years.  You would essentially be getting 2013 – 2015 technology in your vehicle, which would not only add factory navigation to your vehicle, but also add all of the MyLink features to your system ( phonebook downloading, voice recognition, Bluetooth streaming audio, Stitcher / Pandora, turn by turn instruction muting drivers side speaker, and more ).  

You will retain ALL of your factory features, with the exception of the lock / unlock feature located on your existing console, unless you are a 2012 – 2015 model year.  If adding the navigation part of the install isn’t as important and you would like to save a few bucks by just adding the MyLink features to your new touchscreen, just simply select from the drop down menu above.  Just note that navigation will not be included if you select the MyLink Only option.

2010 – 2012 CHEVY CAMARO NAVIGATION SYSTEM FEATURES INCLUDE

  • Actual GM OEM Mylink Chevrolet Camaro Navigation System, not an interface or overlay
  • Upgrades your vehicle with the new 7″ factory screen
  • Upgrades your vehicle with all of the new MyLink features in addition to adding a navigation system
  • Full touchscreen controls
  • Full Navigation Voice Recognition Features (when applicable)
  • Turn by turn guidance over left front speaker while system fades the music
  • Successful integration into the HUD (when applicable)
  • Actual OEM system can be serviced at any GM dealer across the US and Canada
  • All parts supplied for complete and total factory integration
  • E.M Mapping with full coverage for: USA, Puerto Rico, Virgin Islands, Mexico, and Canada. Check for Map updates on this link: The GM Navigation Store
  • Plus more!

INSTALLATION DIFFICULTY

REQUIREMENTS

  • Professional installation recommended
  • VIN # Number required for programming

Fitment:

• 2010 – 2012 Chevy Camaro

Additional Shipping Info

Have you been looking long and hard for the new factory GM MyLink system with navigation to your 2010 – 2012 Chevy Camaro?  Then look no further, here we will turn your 2010 – 2012 Chevy Camaro into Navigation System equipped. MVI has successfully retrofitted the new Factory Mylink Chevrolet Camaro navigation system to fit the 2010 – 2012 Chevy Camaro model years.  You would essentially be getting 2013 – 2015 technology in your vehicle, which would not only add factory navigation to your vehicle, but also add all of the MyLink features to your system ( phonebook downloading, voice recognition, Bluetooth streaming audio, Stitcher / Pandora, turn by turn instruction muting drivers side speaker, and more ).  

You will retain ALL of your factory features, with the exception of the lock / unlock feature located on your existing console, unless you are a 2012 – 2015 model year.  If adding the navigation part of the install isn’t as important and you would like to save a few bucks by just adding the MyLink features to your new touchscreen, just simply select from the drop down menu above.  Just note that navigation will not be included if you select the MyLink Only option.

2010 – 2012 CHEVY CAMARO NAVIGATION SYSTEM FEATURES INCLUDE

  • Actual GM OEM Mylink Chevrolet Camaro Navigation System, not an interface or overlay
  • Upgrades your vehicle with the new 7″ factory screen
  • Upgrades your vehicle with all of the new MyLink features in addition to adding a navigation system
  • Full touchscreen controls
  • Full Navigation Voice Recognition Features (when applicable)
  • Turn by turn guidance over left front speaker while system fades the music
  • Successful integration into the HUD (when applicable)
  • Actual OEM system can be serviced at any GM dealer across the US and Canada
  • All parts supplied for complete and total factory integration
  • E.M Mapping with full coverage for: USA, Puerto Rico, Virgin Islands, Mexico, and Canada. Check for Map updates on this link: The GM Navigation Store
  • Plus more!

INSTALLATION DIFFICULTY

REQUIREMENTS

  • Professional installation recommended
  • VIN # Number required for programming

Fitment:

• 2010 – 2012 Chevy Camaro

Reviews

There are no reviews yet.

Be the first to review “2010 – 2012 Chevy Camaro MyLink Screen Upgrade with Optional Factory Navigation System”

Related products

Scroll to Top

Helpful Info to Reach MVI

The best way to get in touch with us to get your questions answered is by using the chat bubble located in the bottom right corner of every page. You can also use the contact us form located on the contact page.
We get a flood of messages, so the fastest way to get your questions answered, is to leave us as much information as possible about what you are looking to accomplish. This will eliminate a lot of back and forth messages.

We will ask for your Vin# so that we can see how your vehicle is currently built. This will allow us to give you the most accurate information. Please try to get this to us when submitting your question or reply back to one of the message confirmations you will receive shortly after your question is submitted.

Hi there, how can we help you today? Send MVI a message.

Important Things To Know Prior To Checking Out:
Your cart is empty.

Looks like you haven't made a choice yet.

Your cart is empty. Shop now