2013 - 2015 Chevy Camaro Factory MyLink Navigation System

MVI is proud to bring you the genuine GM Chevy Camaro Touch Screen MyLink Navigation System, for your 2013 – 2015 Chevrolet Camaro! The great news is you retain all of the factory features and looks; including the Satellite radio, USB / AUX inputs, steering wheel controls and the On-Star system (if applicable).



Ask Product Question:
If you have additional questions regarding this product, please click the button above and we will get back to you as soon as possible.

Get Order in Place:
If you have all the info you need to get an order in place, hit the button above. FYI, this will take you to a form to fill out so we can contact you regarding the order. We will want to chat a little further to make sure both parties are on the same page regarding product operation, installation, shipping timeline and tech support process before getting the order in motion.

Please Verify

Have one of the original previous model Camaro’s? No Problem. You can use this page to check out and fully upgrade your Non-MyLink Base Radio, or feel free to check out our 2010 – 2012 Camaro Touch Screen Radio Page.

Wouldn’t it be nice to give your 2013 – 2015 Chevy Camaro an actual OEM / GM MyLink Navigation system just as if it came from the factory itself? We offer this in 3 different forms, so please read through the info below before making your selection from the dropdown menus above.

All of our systems come complete with everything you’ll need for your installation; including all harnessing, GPS antenna or Splitter / Cable Kit, a complete set of instructions, installation video, programming to your specific vehicle (no dealer programming needed), and up to 15 minutes of technical support (Text Message Only)!

camaro map


If you have a base model Chevy Camaro without the MyLink Touchscreen, we have you covered. Just select option 3 or 4 in the drop down above. Option 3 will give you the Factory MyLink 7 inch touch screen radio (also good for 2010 – 2012 model years). This kit will ship with the required Harness Kit, MyLink Radio and the 7 inch touch screen. Everything you need to successfully install the genuine MyLink setup into your Camaro. This is a mildly advanced install, so please make sure to watch the install video to make sure you are comfortable with what is involved. If this is out of your comfort level; a local qualified shop will gladly do the work for you. You’ll want to budget 4-5 hours install time and labor for this upgrade.


2013 camaro zl1 convertible model


If you have a 2013 – 2015 Camaro with the Factory Touch Screen MyLink Radio already equipped, we can upgrade you to the Factory GM Navigation with a Radio Only Upgrade. This upgrade will add the factory Nav touch icon to your existing screen and control panel. This option will give you the full factory navigation interface in the vehicle with voice recognition and turn by turn guidance. You will access the Nav from the touch icon only, you will not have the Hard Nav button on the outer edge of the control panel. Just select option 1 in the drop down menu above. This is a way to save some money on the upgrade, however there is a couple small things to be aware of if you decide to go this route.

First, you will NOT be able to subscribe to XM NAV Traffic. This service does require the new Hard Nav Button control panel as well. Traffic is a paid subscription you have to sign up with through XM, and there can be some challenges getting this active. So, if this is something you really want, you’ll want to message us below in the chat for more info on that, and be sure to place the order with option 2 in the drop down menu above.

Secondly, and this is small, but the screen will not auto dim at night time, unless you get the full Hard Nav Button control panel. You can go in and manually dim the screen through the touchscreen, but it won’t auto dim for you unless you get the new control panel in the upgrade as well.

navigation manual


This upgrade will replace both the Radio Module and the Screen / Control Panel to add the Hard NAV Button to the outer edge. This would give you the same equipment that the factory would have put into the car from the factory. This is a bit more pricey upgrade upfront for the Chevy Camaro MyLink navigation upgrade, but we do offer up a “Buy Back” for the old core parts. The money back will really depend on the condition the old parts are in, but it does give you the ability to recover some of the upgrade cost. Message us below for more information on that. You will also have the option of selling that old equipment on eBay or other selling platforms. This option is available by selecting the second option in the drop down menu above.

Install for Option 2 or Option 3 is all plug and play

You just have to get the screen out to swap the radio and hook up the OnStar Splitter / Cables for the GPS antenna. First portion of the video above will apply, you just won’t have any of the wiring shown in the video.

Install for Option 2 or Option 3 is all plug and play

features include

  • Actual GM OEM MyLink / Navigation System, not an interface or overlay
  • Adds Mylink Touchscreen (if not already equipped)
  • Adds the Navigation Icon to the Mylink Touchscreen (if MyLink / NAV add on is selected)
  • Full touchscreen controls
  • Full Navigation Voice Recognition Features
  • Communicates and displays MyLink / Navigation information in the Heads Up Display if equipped
  • Turn by turn guidance over left front speaker while system fades the music
  • All parts supplied for complete and total factory integration
  • Plus more!


  • Professional installation recommended
  • VIN # Number required for programming



D Smith
D Smith
Mar 3, 2021
Read More
Great communication. Great quality! It was easy to install, no issues at all. Highly recommend these guys if you want to upgrade your chevy navigation. Thank You MVI!
Scroll to Top

Helpful Info to Reach MVI

The best way to get in touch with us to get your questions answered is by using the chat bubble located in the bottom right corner of every page. You can also use the contact us form located on the contact page.
We get a flood of messages, so the fastest way to get your questions answered, is to leave us as much information as possible about what you are looking to accomplish. This will eliminate a lot of back and forth messages.

We will ask for your Vin# so that we can see how your vehicle is currently built. This will allow us to give you the most accurate information. Please try to get this to us when submitting your question or reply back to one of the message confirmations you will receive shortly after your question is submitted.

Hi there, how can we help you today? Send MVI a message.