Looking to add the factory 7″ MyLink or Navigation touchscreen system to your 2010 – 2016 Chevy Camaro? MVI is proud to introduce our Custom Hand Built in the USA Wiring Harness kits. Now with our custom wire harness kits you can do just that. Featuring Plug and Play O.E.M Connectors and terminals. This custom built harness will also include access to our DETAILED instructional video and installation reference photos for ease of installation. All of our harness kits are made with care by our trained experts.
Please Note: This product is intended for customers who already have a verified good working condition touch screen and Radio control module for their vehicle. If you plan to use a module from a different vehicle you will REQUIRE custom programming services prior to it being installed in your vehicle for the system to work. Please contact MVI to insure you have the proper radio that will work for your vehicle, and please read carefully below our process for this service and select the desired service from the drop-down above.
Don’t have the factory 7″ Touchscreen or radio control module already? We also have complete kits available to upgrade your Camaro here: 2010 – 2012 Chevrolet Camaro complete factory Navigation System OR 2013 – 2016 Chevy Camaro complete factory Navigation System which can also be purchased as a complete kit with screen, radio components, wiring, and vehicle specific software programming for your Non Nav vehicle.
Programming Services and Processes:
Please Note: In order for the new radio to function in your vehicle it will need to be divorced from the donor vehicle and set back up specific to your vehicle. MVI offers this custom programming service for $225 and this does include the ground return insured shipping of the radio back to you. Due to the high volume of shipments we get on a daily basis, there is a specific process that needs to be followed to insure that no radios get lost in the shuffle and create a further delay in completing your order.
The process is as follows: After placing your order above you will immediately be sent an email (to the email address provided at checkout) with your order confirmation and placed into our On-Hold order cue while we finalize previous customer orders. This On-Hold process typically takes 2-3 business days, depending on order volume. You will want to make sure and print off a copy of this order confirmation to place inside the box with your radio being sent in. Once we have placed you into our processing cue you will receive another email (to the email address provided at checkout), that will contain instructions on how to properly box, protect and where to ship your radio in for the work. We recommend shipping and insuring your shipment with either UPS or FedEx so that you are covered if the shipment goes missing or gets damaged along the way. MVI is not responsible for any loss or damage caused by the shipping company you choose to use when sending your radio into us.
It is at this point that MVI will begin building your harness and place your order on the “radio send in” waiting list. Once the radio arrives, we will perform the required work to the radio (1-2 business days), box it back up with the new harness kit and ship it back out to you complete using the insured shipping label we will provide. You will then get a final email showing the order has been completed and we will provide you the tracking information being used to track the package back to you with.
Genuine OEM Connectors and Terminals
ALWAYS SOLDERED NEVER CRIMPED
Wrapped in protective automotive grade fabric tape for OEM look
Each wire is verified and tested after completion to insure operation upon installation
Plug and Play Installation where possible (One Hard Wire connection on 2010 – 2013 model years will be required) Retains or Adds USB
Hand built in the USA to exact measurements to insure a proper O.E.M fit
Available either with or without navigation antenna/setup based on upgrade needs
Ability to add backup camera with supplied dedicated camera input
Factory 7″ Touch Screen (If you have not already obtained a touch screen and Nav Module please consider our complete plug and play system available here: 2010 – 2012 Chevrolet Camaro complete factory Navigation System OR 2013 – 2016 Chevy Camaro complete factory Navigation System
MyLink Navigation or Non Navigation Radio Control Module (Note: if you plan to use a module from a different vehicle you will need custom programming in order for the system to work with your vehicle. Please read carefully above and select proper option from menu dropdown.
If you have not already obtained a touch screen and Nav Module please consider our complete plug and play system available here: 2010 – 2012 Chevrolet Camaro complete factory Navigation System OR 2013 – 2016 Chevy Camaro complete factory Navigation System
Last 8 of vin number needed upon purchase to verify exact vehicle options.
This kit will require one single hardwired connection for power (only on 2010 – 2013 model years).
Professional installation is recommended if you are not familiar with automotive electronics and installations. We do provide up to 15 minutes of BASIC installation support for customers that prefer to do the install on their own, for trouble shooting purposes ONLY. As a custom business we are NOT able offer on-demand tech support. Tech support must be scheduled via TEXT MESSAGE only @ (919) 995-9526. For more info please view our Terms and Conditions.
2010 2011 2012 2013 2014 2015 2016 Chevy Camaro
For more information on any of our products:
Please Call 866-428-3585 / TEXT 919-995-9523 or make a product inquiry.
Business Hours: Monday - Friday: 9am - 4pm (MST).