2014 – 2017 MyLink & IntelliLink Wiring Harness Kit for 8″ Navigation Screen Upgrades

$299.00

Please carefully read all the check boxes and select the proper drop down menu options for order accuracy.

Harness Type *

Please select your vehicle type.

Antenna Kit *

Please select if you need a GPS or XM Antenna

Tailgate Camera (Trucks Only)

Please see the “FAQ” tab below for more information on how to determine if you are pre-wired or not

Programming *

Please see the “Programing” section below for important information about programming process.

Last 8 of VIN# *

Used to custom build the harness to your vehicles factory options

Please Verify *

Description

Looking to upgrade your small 4” screen to the larger 8” Color Touch Display? Now with our custom harnessing kits you can do just that. Featuring Plug and Play OEM Connectors where applicable. This custom built harness will also include access to our DETAILED instructional video and installation reference photos for ease of installation. This kit will require some soldering for the required DATA connections.  MVI is proud to introduce our Custom Hand Built in the USA Wiring Harness kits. All of our harness kits are made with care by our trained experts.

Please Note: This product is intended for customers who have already obtained a factory 8″ touch screen and IO4 or IO5 MyLink or IntelliLink control modules. 

We also have complete kits available for your 2014 – 2018 Chevrolet Truck Factory OEM IO3/IO4 (4.2” screen) to IO5/IO6 (8” color touchscreen) system with optional Apple Carplay / Android Auto and Factory Navigation OR 2014 – 2018 GMC Truck Factory OEM IO3/IO4 (4.2” screen) to IO5/IO6 (8” color touchscreen) system with optional Apple Carplay / Android Auto and Factory Navigation  which include the 8″ screen, radio components, wiring, and vehicle specific software programing for your IO3  or IO4 vehicle. Please see the FAQ tab above for information on how to determine if your vehicle is equipped with IO3 or IO4.  

 

Programming Services and Processes:
Please Note:  In order for the new radio to function in your vehicle it will need to be divorced from the donor vehicle and set back up specific to your vehicle. MVI offers this custom programming service for $225 and this does include the ground return insured shipping of the radio back to you. Due to the high volume of shipments we get on a daily basis, there is a specific process that needs to be followed to insure that no radios get lost in the shuffle and create a further delay in completing your order. 

The process is as follows: After placing your order above you will immediately be sent an email (to the email address provided at checkout) with your order confirmation and placed into our On-Hold order cue while we finalize previous customer orders. This On-Hold process typically takes 2-3 business days, depending on order volume. You will want to make sure and print off a copy of this order confirmation to place inside the box with your radio being sent in. Once we have placed you into our processing cue you will receive another email (to the email address provided at checkout), that will contain instructions on how to properly box, protect and where to ship your radio in for the work. We recommend shipping and insuring your shipment with either UPS or FedEx so that you are covered if the shipment goes missing or gets damaged along the way. MVI is not responsible for any loss or damage caused by the shipping company you choose to use when sending your radio into us.

It is at this point that MVI will begin building your harness and place your order on the “radio send in” waiting list. Once the radio arrives, we will perform the required work to the radio(1-2 business days), box it back up with the new harness kit and ship it back out to you complete using the insured shipping label we will provide. You will then get a final email showing the order has been completed and we will provide you the tracking information being used to track the package back to you with.

 

Features include:
Genuine OEM Connectors and Terminals
ALWAYS SOLDERED NEVER CRIMPED
Wrapped in protective automotive grade fabric tape for OEM look
Each wire is verified and tested after completion to insure operation upon installation
Plug and Play Installation where possible (Some soldering will be required)
Hand built in the USA
Built to exact measurements to insure a proper and OEM fit
Factory OEM Mic pre-mounted in factory panel for Bluetooth
Available either with or without navigation antenna/setup based on upgrade needs
Ability to add backup camera with supplied dedicated camera input. Click below for more info!

2014-2018 GMC Sierra / Chevy Silverado Factory Tailgate Backup Reverse Camera

 

Requirements:
Factory 8” Touch Screen (If you have not already obtained a touch screen please consider our complete plug and play system available here: GMC or Chevy)
MyLink / IntelliLink Control Module (Note: if you plan to use a module from a different vehicle you will need custom programming in order for the system to work with your vehicle. Please read above for programming information. If you have not already obtained a control module please consider our complete plug and play system available here: GMC or Chevy.)
Last 8 of vin number needed upon purchase to verify exact vehicle options.
Soldering capabilities for 4 Data wires (brief instructional video available upon request)
Professional installation is recommended if you are not familiar with automotive electronics and installations. We do provide up to 15 minutes of BASIC installation support for customers that prefer to do the install on their own, for trouble shooting purposes ONLY. As a custom business we are NOT able offer on-demand tech support. Tech support must be scheduled via TEXT MESSAGE only @ (919) 995-9526. For more info please view our Terms and Conditions.

 

Fitments:
2014-2017 GMC Sierra
2014-2017 Chevrolet Silverado
2014-2017 GMC Yukon and Yukon XL
2014-2017 Chevy Tahoe and Suburban

 

For more information Mon-Fri 9AM-5PM MST please call 866-428-3585, TEXT 919-995-9523, or email us at support@gm-navigation.com.

Additional information

Weight3 lbs
Dimensions12 × 12 × 12 in

FAQ

In order to perform the 2014 – 2018 GMC IntelliLink Factory 8″ Screen Upgrade you will need option code IO3 or IO4. 

If your vehicle is equipped with IO3 you may also be interested in our 2014 – 2018 GMC IntelliLink Factory CarPlay / Android Auto 7″ Screen Upgrade / IOB OR 2014 – 2018 Chevy MyLink Factory CarPlay / Android Auto 7″ Screen Upgrade / IOB.

For vehicles equipped with IO5 or IO6 please see our GMC CarPlay / Android Auto upgrade OR Chevy CarPlay / Android Auto upgrade.

 

 

Checking for “Pre-wired” Camera Connections at the Rear of the Truck

2014 – 2015 Trucks:

2016 – 2018 Trucks:

 

Checking for “Pre-Wired” Camera Connections at the Front of the Truck

Some vehicles will only have the wiring at the back of the vehicle and not up front. To be completely sure if you are FULLY Pre-Wired you will want to inspect the plug at the proper module up front. Please reference the pics below that represent your trucks current operating system.

I04 (4.2″ Screen With MyLink) and I05 – I06 (8″ Touchscreen) Trucks:

Wires must be present in slots 5 and 6 of the 12 pin Grey Molex at HMI (located behind the glove box).

I03 Trucks (4.2″ Screen Non MyLink):

Wires must be present in slots 4 and 5 of the Grey 20 pin Molex plug at the radio (located behind the screen).

I0B Trucks (7″ Touchscreen):

Wires must be present in slots 14 and 15 of the Grey 20 pin plug at the radio(located behind the screen).

You may also like…