2010 – 2015 Camaro MyLink Upgrade Wire Harness Kit for 7 inch MyLink / Navigation Touchscreen Upgrades



Fits 2010 – 2015 Chevrolet Camaro

Compatibility and Programming

Please Supply Last 8 of Vin#

Year / Make / Model

Custom Built Harness Kits

Categories: ,

Chevy Camaro MyLink Upgrade Wire Harness Kit for 7 inch MyLink

MVI is proud to introduce our Custom Hand Built in the USA Wiring Harness kits. With our custom built Chevy Camaro MyLink Upgrade Wire Harness kits you can add the factory 7 inch MyLink / Navigation touchscreen system to your 2010 – 2015 Chevy Camaro. Featuring Plug and Play O.E.M Connectors and Terminals! This custom built harness will also include access to our DETAILED instructional video and installation PDF for ease of installation.  All of our Chevy Camaro MyLink Wire Harness kits are made with care by our trained experts.

Please Note: The Camaro Mylink Upgrade Kit is intended for customers who already have a verified good working condition touch screen and Radio control module, that has been programmed for their vehicle. If you plan to use a module from a different vehicle you will REQUIRE custom programming services prior to it being installed in your vehicle for the system to work. Please contact MVI to insure you have the proper radio that will work for your vehicle, and please read carefully below our process for this service and select the desired service from the drop-down above. 

Don’t have the factory 7″ Touchscreen or radio control module already?  We also have complete kits available to upgrade your Camaro here: 2010 – 2012 Chevrolet Camaro complete Factory MyLink / Navigation SystemOR  2013 – 2015 Chevy Camaro complete Factory MyLink / Navigation System which can also be purchased as a complete kit with screen, radio components, Chevy Camaro MyLink Wire Harness, and vehicle specific programming.

Programming Services and Processes

Please Note:  In order for the new or used radio to function in your vehicle it will need to be properly programmed specific to your vehicle. MVI offers this custom programming service for starting at $199.00 (select from menu above).
Due to the high volume of shipments we get on a daily basis, there is a specific process that needs to be followed to insure that no radios get lost in the shuffle and create a further delay in completing your order:

After placing your order you will be sent an email (to the email address provided at checkout) with your order confirmation. You will want to make sure and print off a copy of this order confirmation to place inside the box with your radio being sent in. You will receive another email (to the email address provided at checkout), that will contain instructions on how to properly box, protect and where to ship your radio in for the work. Depending on our current workload, the email with the ship to address may take some time, so feel free to use the message app below to request the address if you want to get your radio shipped out quickly. We recommend shipping  your shipment with either UPS or FedEx, and make sure to place insurance on the package, so that you are covered if the shipment goes missing or gets damaged along the way. MVI is not responsible for any loss or damage caused by the shipping company you choose to use when sending your radio into us.

At this point, MVI will begin building your Chevy Camaro MyLink Wire Harness and place your order on the “radio send in” waiting list. Once the radio arrives, we will perform the required work to the radio (1-2 business days), box it back up with the new harness kit and ship it back out to you complete using the insured shipping label we will provide. You will then get a final email showing the order has been completed and we will provide you the tracking information being used to track the package back to you with.

Install Video: MyLink Screen Upgrade Process

Camaro Mylink Upgrade Features include

Genuine OEM Connectors and Terminals
Wrapped in protective automotive grade fabric tape for OEM look
Each wire is verified and tested after completion to insure operation upon installation
Plug and Play Installation where possible (One Hard Wire connection on 2010 – 2013 model years will be required) Retains or Adds USB
Hand built in the USA to exact measurements to insure a proper O.E.M fit
Available either with or without navigation GPS antenna or splitter cable kit depending on your upgrade needs
Ability to add backup camera with supplied dedicated camera input


Factory 7 inch Touch Screen and Radio Module (If you have not already obtained a touch screen and Radio Module please consider our complete plug and play system available here: 2010 – 2012 Camaro complete factory MyLink / Navigation System OR 2013 – 2015 Camaro MyLink / Navigation Upgrade

MyLink Radio Control Module (Note: if you plan to use a module from a different vehicle you will need custom programming in order for the system to work with your vehicle. Please read carefully above and select proper option from menu dropdown.

Last 8 of vin number needed upon purchase to verify exact vehicle options.

This kit will require one single hardwired connection for power (only on 2010 – 2013 model years).
Professional installation is recommended if you are not familiar with automotive electronics and installations. We do provide up to 15 minutes of BASIC installation support for customers that prefer to do the install on their own, for trouble shooting purposes ONLY. As a custom business we are NOT able offer on-demand tech support. Tech support must be scheduled and handled via TEXT MESSAGE only. For more info please view our Terms and Conditions.


2010 – 2015 Chevy Camaro

Weight5 lbs
Dimensions12 × 12 × 12 in

You may also like…

Scroll to Top

Helpful Info to Reach MVI

The best way to get in touch with us to get your questions answered is by using the chat bubble located in the bottom right corner of every page. You can also use the contact us form located on the contact page.
We get a flood of messages, so the fastest way to get your questions answered, is to leave us as much information as possible about what you are looking to accomplish. This will eliminate a lot of back and forth messages.

We will ask for your Vin# so that we can see how your vehicle is currently built. This will allow us to give you the most accurate information. Please try to get this to us when submitting your question or reply back to one of the message confirmations you will receive shortly after your question is submitted.

Hi there, how can we help you today? Send MVI a message.

Important Things To Know Prior To Checking Out:
Your cart is empty.

Looks like you haven't made a choice yet.